The HGLRC M100-5883 GPS Module is designed for compatible FPV drones and fixed-wing UAVs that require satellite positioning and compass functionality. It features a 10th-generation GNSS chip, a ceramic antenna, and an integrated compass. The module supports compatible satellite navigation systems and is intended to help flight controllers obtain positioning data for supported navigation applications.
Its compact design makes it a useful option for drone builds where space and weight matter. Before purchasing, confirm compatibility with your flight controller, firmware, wiring, and mounting requirements.
HGLRC M100-5883 GPS
New upgraded 10th generation chip with compass
Suitable for FPV fixed-wing UAV
Technical Parameters:
1. Chip: M10 (tenth generation chip)
2. Antenna: ceramic antenna
3. Frequency: GPS/QZSS L1C/A, SBAS EGNOS, GAGAN, MSAS and WAAS
GLONASS L1OF, BDS B1I, Galileo E1B/C
4. Receive channel: 72ch
5. Baud rate: 115200bps.
6. Output frequency: 10Hz
7. Power input: 3.3-5V
8. Size: 21x21x8.02mm
9. Weight: 7.73g
The HGLRC M100-5883 GPS Module is designed for compatible FPV drones and fixed-wing UAVs that require satellite positioning. Before installation, check that your flight controller supports the module's connection interface and required firmware configuration.
The module supports compatible satellite navigation systems, including GPS, GLONASS, Galileo, and BeiDou. Positioning performance depends on satellite visibility, antenna placement, weather, and the surrounding environment. For best results, place the ceramic antenna where it has a clear view of the sky.
The integrated compass provides heading information for compatible flight controllers. Install the module away from motors, power cables, and other potential sources of magnetic interference. Follow the manufacturer's instructions for module orientation and compass calibration.
Connect the HGLRC M100-5883 GPS Module according to the manufacturer's wiring diagram. Verify the voltage, connector pinout, and firmware support before powering the system. After installation, check satellite acquisition, positioning data, and compass readings in your flight-control software.
Inspect the wiring and connectors regularly for damage or loose connections. Keep the module securely mounted and protect it from moisture and physical impact.
With multi-constellation support, a ceramic antenna, and compass functionality, the HGLRC M100-5883 GPS Module is a useful option for compatible drone navigation builds. Confirm the product specifications and flight-controller compatibility before ordering to ensure it meets your requirements.
The HGLRC M100-5883 GPS Module is a navigation component for compatible FPV drones and fixed-wing unmanned aerial vehicles. Its GNSS receiver and integrated compass provide positioning and heading information that supported flight controllers can use for navigation features. It is important to check compatibility with your existing drone equipment before placing an order.
The module supports GPS, GLONASS, Galileo, BeiDou, and compatible augmentation systems as specified for the product. Access to multiple satellite constellations can help a compatible receiver use signals from different navigation networks. Actual performance depends on satellite visibility, antenna placement, environmental conditions, and the flight controller's configuration.
The ceramic antenna is designed to receive satellite signals. For better reception, install the module in a suitable location with as much unobstructed sky visibility as possible. Avoid placing it beneath components that could block signals or close to equipment that may cause interference. The correct orientation and mounting arrangement should follow the manufacturer's instructions.
Mount the module securely and protect its wiring from vibration, sharp edges, and accidental disconnection. Connect it according to the manufacturer's documentation, then configure the GPS settings in your compatible flight controller. Allow sufficient time for satellite acquisition and check that the system reports valid positioning information before attempting navigation functions.
If the module takes a long time to acquire satellites or reports inconsistent positioning, check antenna visibility, wiring, connector condition, and firmware configuration. Compass errors may require checking the mounting location and repeating calibration. Inspect the module periodically for loose connections, physical damage, or signs of moisture.
The HGLRC M100-5883 GPS Module combines satellite navigation support, a ceramic antenna, and integrated compass functionality in one component. It can be considered for compatible FPV and fixed-wing UAV projects where these features meet the build requirements. Review the complete specifications and verify compatibility with your flight controller before purchasing.