The LAVA Series 1104 7200KV Brushless Motors 24mm are lightweight, high-performance motors designed for 3S 2.2-inch FPV builds, offering responsive power, smooth throttle control, and efficient flight performance.LAVA Series 1104 | 7200KV Brushless Motors is designed for the 3S 2.2” quads, with smoother torque output performance. Combined with the lower pitch Gemfan 2218 3-Blade Propellers (1.5mm Shaft) and the F4 2-3S 20A AIO FC V1, it could enable pilots to swift, agile, and smooth freestyle. Ensuring enough creative space for cinewhoop to explore and capture the most imaginative aerial feats, easily meet professionally shot film creation needs, leading the 3S 2.2” quads for cinewhoop to new heights.
Note: Only the 24mm length Version has a connector, suitable for the Pavo20 Pro.
The picture below is the diagram of the LAVA Series 1104 | 7200KV Brushless Motors(24mm).
The picture below is the diagram of the LAVA Series 1104 | 7200KV Brushless Motors(80mm).
The LAVA Series 1104 7200KV Brushless Motors 24mm are designed for compact FPV drones where low weight, responsive performance, and efficient propulsion are important. The 7200KV version is intended for 3S-powered 2.2-inch quads and works particularly well with suitable low-pitch three-blade propellers. BETAFPV specifies a maximum power of 122.5W and maximum current of 10.2A for the 7200KV version.
At approximately 5.3g per motor, the lightweight design helps keep the overall aircraft weight under control. This makes the motor suitable for small cinewhoops, micro freestyle builds, and other compact FPV platforms where agility and efficient power delivery are important.
The LAVA Series 1104 7200KV Brushless Motors 24mm provide a high-KV setup for 3S applications. When paired with compatible Gemfan 2218 three-blade propellers, the manufacturer reports more than 230g of maximum thrust and a thrust-to-weight ratio above 5:1 under the specified test setup.
The motor uses a 1.5mm shaft with a 5mm shaft length and a 4 × M2 mounting pattern. The 24mm version also has a connector and is specifically suitable for the Pavo20 Pro according to the manufacturer.
For pilots building a small FPV drone, choosing the correct motor KV is important. The 7200KV configuration is intended for 3S power systems, making it a suitable choice for compact 2.2-inch platforms. Its combination of lightweight construction and high KV can provide quick response and agile handling for freestyle and cinematic flying.
Before installation, check the motor, propeller, battery, and ESC specifications together. The complete propulsion system should be matched according to the manufacturer's recommended voltage and current requirements.
The LAVA Series 1104 7200KV Brushless Motors 24mm can be paired with suitable 1.5mm-shaft Gemfan three-blade propellers and compatible 3S batteries. BETAFPV also lists the Pavo20 Pro and F4 2-3S 20A AIO FC V1 among recommended components.
These motors are a practical option for pilots who want to build a lightweight 2.2-inch FPV platform with responsive handling, efficient power delivery, and compact dimensions.